Main features
Air conveyor
Air conveyor is horsed on the floor, with fan installed on the top. Air filter is positioned at every
entrance of air fan, to prevent dust blown into bottles. Bottles are blocked on the neck in the
conveyor and transported into filling machine by blowing power. All are made of stainless steel
ANSI304, except the horses, board of plastic and nylon.
 
Technical parameter
1. Model of fan: DF-9;
2. Power fan: 2.2 KW/Unit; flowing capacity: 2800m3/h; full pressure: 1650MPa; rotation speed: 2840r/min; weight:38kg
4. Length of air conveyor: according to plant layout
              
Flat conveyor
1.Stable conveying, using synchronous chasing control between the conveying belt and
engine, making bottles in good condition in the conveying: non-falling, non-block, non-jam.
2. Conveying belt is designed by module, component can be interchanged easily, with compact structure, low noise, easy assembling and maintaining, good flexibility to combine the
bottle type according to the different capacity.
3. The design of electrical control is advanced and rational, we can design the control
method , select the electrical control component according to client's layout, to improve
the conveying stability
4. Set the switch according to conveying system layout or customers' reasonable requirement,
for the convenience of operation.
5. Belt lubricating system is equipped
6.Main part all using ANSI304
7. Fringe board is using the U.S. Rexnord technology to produce

Specification:
1.Conveyor Height:1050mm
2.Side panel: 304 stainless steel sheet, thickness is 2mm
3.Power: HANGZHOU JIE Brand 0.75KW
4.Supporting leg: 304 stainless steel
5.Trunking and cover: 304 stainless steel
6.Lubricant water conservation tank: 304 stainless steel
7.Chain plate: Domestic high-quality plastic chain plate,polyoxymethylene (POM)
8.Bearing housing: 304 stainless steel cage

	Washing heads:  The rotary disk is fully made of SUS304 stainless steel. Using imported special efficient spray nozzle, the washing water will be sprayed in a particular angle, can wash any part of the inner wall, rinse with water thoroughly and save flush bottle. Bottle clamp and lifting mechanism of sliding sleeve adopts Germany Igus corrosion resistant bearing without maintenance. Washing part moves by a frame in the transmission system through the gear transmission.
	Filling heads:  The washing bottle, filling, sealing are connecting with the thumbwheel card bottleneck transportation methods. The rotating disk is all made of SUS304 stainless. Filling method is fravity filling. Filling valve manufactured by SUS304. The filling valve structure design is reasonable, the filling quantity is accurate.
	Capping heads:  The capping machine is the highest precision in 3-in-1 unit machine, on the reliability of equipment operation, has enormous influence on the defective rate of the product. Introduced the world's most advanced Italian capping machine technology, combining with the filling machine production experience improvement.

	RO water treatment system:  Adopt different equipment to produce pure water, mineral water etc. The main equipment of RO Water Treatment Plant are silica sand filter, active carbon filter, sodium ion exchanger, hollow fiber, RO( reverse osmosis), UV sterilizer, precision filter, ozone generator, water tank etc. It can effectively get rid of muddy organic matter, iron, manganese etc, reduce the hardness of the water.
	Blow molding system Excellent Mechanical Strength, impact-resisting, and non-craking.  Bottle mouth and thread are of precise measurement.  Plastic Medicine Bottle's safe thread can be molding directly.  The size and weight of the product can calculate and design clearly and meet the requirement of the design without any deviation.
	Automatic labeling machine PLC programmable controller, imported servo motor, servo driver, frequency converter and transducer.  Adopts the positioning module to ensure the casting label precise, rapid and stable.
	PE film packaging machine Automatic PE film heat shrink wrapping machine is suitable for wrapping of such products as can, bottles. Beer, drinks etc. Working with PE film shrink tunnel to pack the goods perfectly, the main parts are imported from international famous companies. It consists of several actuating motors, through cooperation with actuating motors to form the product packed with plastic film.

Quality:



Water Bottling Machine
Technical parameter: 

Factory:

 

1. How to tell us your enquiry? You can contact us by email, phone call, fax, Instant Messenger (Trademanager, WhatsApp, Skype) and let us know your requirement.  

2. Where is your factory? Our Factory is located in Zhangjiagang City, it is very near to Shanghai and Wuxi (airplame and train both available). If you arrive at Shanghai or Wuxi, we can pick you up to visit our factory.  

3. Do you have any technical supports with your Beverage Filling Machines? Yes, We have a professional team of engineers who owned many installation, debug and training experiences abroad, are available to service machinery overseas.  

4. What's your guarantee or the warranty of the quality if we buy your machines? We offer you high quality machines with 1 year guarantee and supply life-long technical support. We Warmly Welcome Customers All Over The World To Our Company If You Have Interests In Our Products. Please Contact Us If You Have Any Problems.