330ml 500ml 1.5L PET water bottle blowing making machine
Specifications
1.Model: FG-6
2.Capacity:9000-10000B/H
3.Bottle type:200-2000ml
Detail specification of FG-4 PET bottle blowing machine
| Main Parameter | ||||
| Model | FG-6 | |||
| Capacity | Depend on bottle design | 9000-10000PCS/H(@500ml, 17g bottles) | ||
| Applicable Preform | Height | <330mm | ||
| Neck | 20mm-25mm | |||
| Applicable Bottle | Neck | 20-25mm | ||
| Volume | Max. 2Liter | |||
| Height | Max. 328mm | |||
| Diameter | Max. 105mm | |||
| Electric consumption | Install power | 51kw | ||
| Heating oven powder | 46kw | |||
| Heating Oven operating power | 26kw | |||
| Air consumption | Pressure | 8m3/min 3.0MPa | ||
| Capacity | 8m3/min 3.0MPa | |||
| Mold Chiller | Pressure | 4-6Bar | ||
| Temperature | 6-13ºC | |||
| Flow | 45L/min | |||
| Oven Chiller | Pressure | 4-6Bar | ||
| Temperature | 6-13ºC | |||
| Flow | 26L/min | |||
| Machine Dimension | L*W*H | 3900*900*2500mm | ||
| Weight | 3500kg | |||
| Capacity: 7000-7500BPH(based on 1L) | ||||
| Max. Volume: 2 Litter Total Size: Blowing Main machine: 3.6*1.3*2.3m Sorting machine: 2*1.5*1.5m/Loader: 3*1*1.5m | ||||
| Main electrics | ||||
| Pneumatic part& Cylinder | Valve | German FESTO | ||
| Electric part | PLC | Japan Mitsubishi | ||
| Servo System | Japan Panasonic | |||
| Frequency inverter | Japan Mitsubishi | |||
| Operating system | Japan Mitsubishi | |||
| Touch screen | Japan Mitsubishi | |||
| Blowing | Valve | Japan Parker | ||
| One-way Valve | German FESTO | |||
| Throttle Valve | German FESTO | |||
| Reducing Valve | German DURAY | |||
| Note: All the electrical components adopts CE, UL, CCC approved international Advanced high-tech product | ||||
I. Brief Introduction:
FG4 is the new generation of linear blowing machine. Comnpared with traditional blowing machine, It has 3 improvement:
1)High speed: China first blowing machine whose single mold speed can reach 1800 BPH. FG6 has 6 cavities, production speed is 9000-10000BPH.
2) Energy saving: It has only 2 lamp boxes, at least 20000USD can be saved per year, electrical ammeter is equipped, you can know how much every single bottle costs you.
3) High Reliability: Machine adopts modularized design principle, the movement is integrated in 3 sets servo motor, which promises this machine will have good condition under full load operation.
II. Technical Features:
1. Servo driving and cam linking movement blowing section:
The unique cam linking system integrates mold-opening, mold-locking and bottom mold-evevating in one movement, equipped with high speed servo motor, which greatly shortens the blowing cycle and accelerates the spped.
2. Minimize distance of heating heads,maximize the heating efficiency.
Heater distance in the heating oven is minimized to 38.1mm, compared with the conventional heating oven it can save more than 30% consumption.Equipped with the air cycling system and redundant heating discharge system it ensures constant temperature in the heating zone.
3. Efficient and soft perform inlet system,ensure the spped and preform protction.
By rotary and soft preform loading system, the speed of preform feeding is ensured, meanwhile, the preform neck is well protected.
4. Modularized design conception, convenient for maintenance and changing changeovers
The machine adopts modularized design concept to make it convenient and cost-saving for the maintenance and changing changeovers.
One Stop Station Services
1) Stand-by engineers team to provide overseas installation and commissioning service.
2) 1 year warranty. During warranty, we provide free of charge for repairing cost.
3) Lifetime maintenance. After-sales department can provide life long maintenance service.
Welcome to visit our factory if you have time!