It is the most stable two-step automatic stretch blow moulding machine.It has four cavities and the maximum capacity of the products is 2L.The capacity can be 6800-7200BPH, It can blow bottles in shapes:Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET etc.
1)High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:6800BPH(4-cavity)
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
| Type | FG4 | ||
| Specifications of bottle | Mould number(piece) | 4 | |
| maxi volume (mL) | 2000 | ||
| maxi height (mm) | 328 | ||
| maxi diameter (mm) | 105 | ||
| Square bottle for max diagonal length (mm) | 115 | ||
| preform Specifications | Suitable inner bottle neck (mm) | 20-25 | |
| preform max length (mm) | 150 | ||
| Capacity (bottles / hour) at 17 g 500mL | 7200 | ||
| Electricity | Install power (kw) | 51 | |
| Heating oven total power (kw) | 46 | ||
| Heating oven actual power consumption (kw) | 26 | ||
| Voltage / frequency (V / Hz) | 380v,50hz | ||
| Allowed voltage fluctuation | ±10% | ||
| HP Air | Pressure(bar) | 30 | |
| Capacity(m³/min) | 4 | ||
| Cooling Water | Mold water | pressure(bar) | 4-6 |
| Suitable temperature range (ºC) | 6-13 | ||
| Flow (L / min) | 45 | ||
| Oven water | pressure(bar) | 4-6 | |
| Suitable temperature range (ºC) | 6-13 | ||
| Flow (L / min) | 22 | ||
| Machine Specification | host machine dimension (m) length × width × height | 3.3*1*2.3 | |
| Weight (Kg) | 3200 | ||
