Semi automatic plastic PET bottle blow machine
1. Controlled by MITSUBISHI touch screen computer. Operate consistently and simply.
2. Pneumatic elements from FESTO (German) and SMC (Japan)
3. Energy-saving and environmentally friendly design. Mechanical units are compact and rational.
4. Malfunction alert and diagnostic units allow easy maintenance.
5. Suitable for manufacturing a variety of PET bottles: Mineral water bottles, edible oil bottles, soda bottles, medicine bottle, cosmetics bottles etc...
6. Oven can be made according the different preform requirements of customers.
Semi automatic plastic PET bottle blow machine
After-sales Service Provided:
The machine which we supply to you, we can give you one year after-sale warranty,
We also can arrange our engineer(s) to your factory to install the equipment and train your staffs by your requirment, but you should pay the round air ticket cost and arrange the hotel accommodation for our engineer(s).
1. Controlled by MITSUBISHI touch screen computer. Operate consistently and simply.
2. Pneumatic elements from FESTO (German) and SMC (Japan)
3. Energy-saving and environmentally friendly design. Mechanical units are compact and rational.
4. Malfunction alert and diagnostic units allow easy maintenance.
5. Suitable for manufacturing a variety of PET bottles: Mineral water bottles, edible oil bottles, soda bottles, medicine bottle, cosmetics bottles etc...
6. Oven can be made according the different preform requirements of customers.
Semi automatic plastic PET bottle blow machine
After-sales Service Provided:
The machine which we supply to you, we can give you one year after-sale warranty,
We also can arrange our engineer(s) to your factory to install the equipment and train your staffs by your requirment, but you should pay the round air ticket cost and arrange the hotel accommodation for our engineer(s).
| component | item | parameter |
| bottle blow department | quantity of mould | 4 |
| height of bottle output(below of back-up ring) | 1.4m | |
| heating part | heating unit | 4 section |
| layer of heating light | 8 | |
| electric parameter | voltage | 380V |
| frequency | 50/60Hz | |
| total power | total power | 20kw |
| air source | low compressed air pressure | 0.7~0.8MPa |
| low compressed air consumption | 1.6m 3 /min | |
| high compressed air pressure | 2.5-3.5MPa | |
| high compressed air consumption | 2.4m 3 /min | |
| heating machine cooling water (temperature≤20 °C ) | pressure | 0.5MPa |
| rate of flow | 1m 3 /h | |
| power | 3.5kw | |
| around oil temperature machine(200 °C ) | pressure | 0.5MPa |
| Only for hot blow bottle | rate of flow | 1m 3 /h |
| power | 10kw | |
| bottom oil temperature machine(140 °C ) | pressure | 0.5MPa |
| Only for hot blow bottle | rate of flow | 0.6m 3 /h |
| power | 5kw | |
| weight | Main engine/heating machine/electric cabinet | 2.2T |
| size | Main engine(L × W × H) | 4000mm × 1450mm × 2000mm |
| Embryo unscramble(L × W × H) | 1300mm × 1300mm × 2300mm | |
| bottle embryo size | height of embryo | ≤150mm |
| inside diameter | 16mm~ 26mm | |
| back-up ring diameter | 26mm~ 36mm | |
| bottle size | range of round bottle diameter | 50mm~ 116mm |
| size(diagonal) | 50mm~116mm | |
| height (below back-up ring) | ≤320mm | |
| scope of volume | 0.2L~2.0L |